coarse ore jaw crusher machine

coarse ore jaw crusher:
High ratio of crushing, homogeneous final grain size, simple structure, can crush rock.
PE crusher

Jaw Crusher is mainly used to crush kinds of mining stones primarily or coarse ore, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in mining, metall-urgical industry, building material, highway, railway, and chemical industry.
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle of Jaw Crusher between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.

 

 

Model	Inlet size	Feed size	Output size	Capacity	Power	Weight
	mm	mm	mm	M3/h	kw	t
PE1500×250	150×250	130	30-100	3	7.5	1.5
PE250×400	250×400	210	40-100	7.5	18.5	3
PE400×600	400×600	340	40-100	30	34	7
PE500×750	500×750	425	50-100	52	55	15
PE600×900	600×900	500	65-160	75	55	15
PE750×1060	750×1060	630	80-140	130	110	33
PE900×1200	900×1200	750	95-165	164	110	55
PE1200×1500	1200×1500	1020	150-300	500	160	100.9
PEX100×600	100×600	80	15	9	7.5	5
PEX fine Jaw Crusher
PEX150×500	150×500	120	30	6	13	2.5
PEX150×750	150×750	120	18-48	16	15	3.5
PEX200×1000	200×1000	160	20-55	23.8	22	6.5
PEX250×750	250×750	210	25-60	22	22	4.9
PEX250×1000	250×1000	210	25-60	32	30	6.5
PEX250×1200	250×1200	210	25-60	38	37	7.7
PEX350×750	350×750	250	35-60	45	37	9.21
PEX300×1300	300×1300	250	20-90	65	75	11